If I understand it correctly, Everclear 151 is 75.5 % pure alcohol (Ethanol) so I would guess the rest is water.
Using 95% Ethanol I get a better burn by adding about 10% water*. At 20% it starts to go the other way so at around 25% will be a bit less efficient than the usual methanol/ethanol mix (SLX) you get over there but probably not by much.
Franco
Almost no yellow/red, just a blue flame. (= hotter)
No idea of why...
(possibly because the stove I used for the tests was made to burn Methanol and had similar results with my versions of the Cat stove)


Edited by Franco (05/31/12 09:57 PM)