As the title says, just for my own information, what is the smallest diameter pot you use with a non specific burner, so just a standard trangia or msr rocket please ?
Registered: 01/16/11
Posts: 180
Loc: Tacoma, Washington
mine is 3.7"dia X 4.7"tall. this perched on top of a pocketrocket (original)… I eeak out a few btu's by having an aluminum wind screen that when set up, is as tall as the top of the pot lid. about 3/4" away from the pot walls
Do you ever have issues with the canister overheating? There are warnings about dire consequences of using a windscreen with a canister stove that usually include the word “explosion”.
Registered: 01/16/11
Posts: 180
Loc: Tacoma, Washington
no.....and yes, I check when in use, I've read, digested, and adjusted my methods to accommodate for this issue..... I won't go into my personal camp stove set up routine, for fear of putting others here to sleep. suffice to say, "it's in place".
Registered: 02/03/06
Posts: 6800
Loc: Gateway to Columbia Gorge
I use a windscreen that goes only 3/4 of the way around the canister, keeping the opening on the downwind side. This blocks most of the wind and helps reduce fuel usage, but allows enough ventilation to keep the canister from overheating. I strongly believe in monitoring open flames constantly anyway (it's only May 9 and western Oregon is already under a Red Flag warning (i.e. high fire danger). Also, my experience has been that a canister stove not monitored has a disturbing tendency for the pot to tip over, of course just as it boils. I do feel the canister frequently to make sure it's not overheating.
The "no windscreen" caution is, IMHO, appropriate for those lacking in common sense. It is true that an exploding canister would completely ruin your day, but keeping close watch on the stove--a good idea anyway--prevents this.
Edited by OregonMouse (05/09/1905:49 PM)
_________________________
May your trails be crooked, winding, lonesome, dangerous, leading to the most amazing view--E. Abbey
The windscreen issue is something to watch for with cannisters, the dome in the base of the cannister is a pressure safety valve, if this starts doming the other way you are in trouble. I have only ever had trouble with cannisters being too cold though, most of my cannister mounts had a sensible gap, even for frying pan use.the air intake replaces the air, and what little radiation you achieve is never enough. Satelite cannisters allow the cannister to be moved during low pressure closer to the flame
Our long-time Sponsor, BackcountryGear.com - The leading source for ultralite/lightweight outdoor gear:
Affiliate Disclaimer: This forum is an affiliate of BackcountryGear.com, Amazon.com, R.E.I. and others. The product links herein are linked to their sites. If you follow these links to make a purchase, we may get a small commission. This is our only source of support for these forums. Thanks.!