Sorry this took me a while to get to ... Life happened. smile

(I made the links bigger to make them easier to spot.)


Here are the bits I used in my Gravity filter build:

Filter: Sawyer Squeeze

Adaptors: convert squeeze to hose barbs
.................The Sawyer Mini has hose barbs integrated, so you can probably use it on it's own - A little lighter and a little smaller

Hose: Silicon Tubing

Various Hardware bits:

Bulkhead connector - For going through the 'dirty' bag

Stem to attache tubing

Filter Adaptor for inside the 'dirty' bag

Pre-Filter inside 'dirty' bag

On/Off hose clamp

Series of Quick Connects used - you have a lot of options here
(You want the 1/4" In-Line Hose Barb styles)


Bag - From a 3-pack of dry-bags I got at wal-mart (they were pretty cheap)


I melted the hole using a socket of the proper diameter (can't remember what size, sorry) for the bulkhead connector.

Everything else pushes together.

Here is the link to the pics again: DIY Gravity Filter

I carry the whole thing within the other bags in the 3 pack - one for just the clean stuff, and the other for everything, including the clean bag. Nice and small!

Hope this helps.

Cheers