Clean out the contents of the cans, and strip off the labels.
Feed the contents to dog!
Use the small church key to make 8 evenly spaced holes in the small
can.
Use the kitchen knife to make a hole in the top of the can, about 7/8"
across. Usually the same size as the inside ring on the can.
Use the large church key to make 8 evenly spaced holes in the large
can.
Line up the smaller can inside the larger, the tabs should interlock.
The burner (small can) should be flat on the ground when placed upright,
do not push the burner too high into the air jacket (larger can).
Bend down tabs on the larger can to secure them better.
!!!IMPORTANT!!!
Make sure you bend all tabs in as far as possible
on the larger can to avoid blocking air, this will cause poor stove performance.
Also ensure you bend the tabs on the inner can out as far as possible for
the same reason.
Put fiberglass insulation into the smaller can. Ensure that the insulation
is below the level of the burner air holes.
Go to the next step:
Step 1&2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10 |