Part 3.



Attachments
secondarywall.jpg

Description: This is the secondary wall, made from aluminum flashing stock. The top is bent over, to seal the hot air from escaping anywhere but into the fire zone.

secondarywallon.jpg

Description: The secondary wall can be spread a little and placed on the outside of the stove. I'll use the wire to snug it in place.

uglypotstand.jpg

Description: Ugly pot stand. I'll make a different one, maybe with hanger wire. This one is a one-of-a-kind thing.

potonstand.jpg

Description: Pot stand is on the stove now.

windscreennext.jpg

Description: So here's the pot on the stove, and the now-defunct-'cause-it-scratches-my-pot!-windscreen.


_________________________
http://pdeboard.com